AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Irving
If your air conditioner is done and you’re ready for a new one, we install central air, heat pumps, mini splits and full replacements for homeowners and building owners across Irving. We know the difference between a south Irving ranch and a Las Colinas tower, and it changes how we plan the work. Same-day service is available on repairs, though a new installation is load-calculated, ordered and scheduled to a fixed date. Call (855) 752-3431 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Why Irving Homeowners Call Highpoint AC Repair for AC Installation
Irving is a city where the equipment and the buildings vary block by block, and installation decisions have to follow the building, not a template. That’s where our technicians come in: they work on nine major brands, including Carrier, Trane, Lennox and Goodman, so we’re already familiar with your system before anyone knocks. Our technicians have up to 11 years of experience, and they carry cross-brand diagnostic knowledge that a single-brand dealer or a general handyman simply doesn’t have.
Because AC installation sits alongside furnace replacement and furnace repair under one company, you get one point of accountability for heating and cooling. No handoffs, no “we only do new units.” We hold every job to the Highpoint standard, which means a higher completion bar than plugging in a box and leaving. Licensed and insured, insured and bonded, with a strong local reputation across Irving. Every install gets a written fixed price and a set install date before work begins.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Ductless Mini Split Installation in Irving
Ductless Mini Split Installation in Irving solves the spaces a ducted system can’t reach: converted garages, room additions, sunrooms, and older homes where running new ductwork would mean tearing into finished ceilings. In south Irving’s post-war ranches, a mini split is often the cleanest answer for a back addition that never had ducts, and in Las Colinas condos it handles a single room without touching the building’s shared risers. A typical ductless mini split installation in Irving is estimated in the $3,500 – $7,500 range depending on zones and equipment, and the written estimate sets the final price.
Single-Zone vs. Multi-Zone
A single-zone mini split covers one room with one outdoor unit and one wall cassette. Multi-zone systems run several indoor heads off one condenser, which makes sense when two or three rooms need cooling and space on the exterior wall is tight.
Where Line Sets and Drains Route
Mini splits need a clear path for the refrigerant line set and a drain that actually falls away from the wall. On dense Irving lots, that routing is planned before the first hole is cut so the finish stays clean and the unit drains properly.
AC Replacement in Irving
AC Replacement in Irving is usually the right call when a condenser is oversized for its ducts, when a compressor has failed after a long stretch of triple-digit heat, or when a rooftop package unit has corroded past saving. The job is more than swapping boxes: it starts with a room-by-room load calculation and a static pressure test, then a SEER2-rated system sized to the actual heat gain. A typical full AC replacement in Irving runs an estimated $3,500 – $7,500, and the written estimate sets the final price before we order equipment.
Matching the Condenser to the Ducts
Dropping a bigger condenser onto original 1960s ductwork causes short cycling and shortens compressor life. We size the new equipment to what the ducts can actually move, and we tell you when duct sealing or resizing belongs in the quote.
Scheduling and Paperwork
Replacement is scheduled to a set install date, since the equipment has to be ordered and the job planned. We handle the permit paperwork and the manufacturer registration as part of the job, not as an afterthought.
Trusted Brands We Service in Irving
We’re certified to work on nine major HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard. That range matters on installation day because the equipment you choose gets matched to the building, not the other way around. We don’t stock parts locally and we don’t claim to; what we bring is brand-matched expertise, so a technician arrives already knowing your model line. On top of that, we can prepare the documentation your chosen brand requires for registration and warranty coverage. In a market as split as Irving, that cross-brand knowledge is the reason we can move from a residential quote to a commercial rooftop plan in the same week.
Common AC Installation Problems We See in Irving Homes
- Oversized condenser on old ducts. A new condenser dropped onto original 1960s ductwork in south Irving short cycles and can fail its compressor early. A load calculation and static pressure test catch it before the equipment is ordered.
- Corroded rooftop package units. Rooftop units on Las Colinas mid-rises take a beating from hail and wind-driven debris, and condenser coils corrode over time. Coil condition and hail guards get checked as part of planning a replacement.
- Closet air handlers with no return capacity. In 1970s ranch homes, a closet-mounted air handler often lacks return air capacity, which freezes the evaporator and throws off refrigerant charge. We address return sizing when we quote the new unit.
- Single-glazed windows that swamp the system. Older Irving homes with single-glazed windows gain more heat than a same-size modern build, so a condenser sized for a newer house runs short. The load calculation accounts for the glass and attic exposure.
See the difference
Before
After
Before
After
Before
AfterPricing for AC Installation in Irving, TX
Installation pricing in Irving is set per job, and the written estimate is what sets the final price. Here are typical estimated ranges so you can plan:
| Service | Typical Estimated Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| AC Replacement | $3,500 – $7,500 |
| AC Repair (for comparison) | $150 – $650 |
| Tune-Up (for comparison) | $80 – $200 |
What moves the number within that range is the load calculation result, the equipment tier, and whether duct sealing, resizing or return work is needed. Restricted-access installs, like a closet air handler or a rooftop unit, also affect labor. Estimates are free. Call (855) 752-3431, and we’ll put a fixed price in writing before anything is ordered.
We Also Serve Cities Near Irving
If you’re just outside Irving, we cover nearby communities too, including Grapevine, Carrollton, Dallas and Lewisville. Same brands, same written pricing, same fixed install date. If you’re not sure whether your address is covered, call and we’ll tell you straight.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Irving
Most cities require a permit for an AC replacement or new installation, so check with the city’s building department for your specific job. We can walk you through what the permit process involves. Call (855) 752-3431 for a free estimate – we’ll handle the paperwork on our end.
You can, but you probably shouldn’t replace only the condenser. Original 1960s ductwork in a south Irving ranch often can’t move enough air for a bigger condenser, which causes short cycling and compressor wear. A load calculation and static pressure test show whether duct sealing or resizing belongs in the quote. Call (855) 752-3431 for an honest answer before you order equipment.
There’s no single size; the answer depends on the load calculation for that specific building and unit. Las Colinas towers have VAV boxes and chilled-water or rooftop systems where the correct match is set by the building’s heat gain, glass exposure and rooftop equipment. We assess the actual space before recommending anything. Call (855) 752-3431 to set up an estimate.
Yes. A ductless mini split is often the best option for a converted garage or addition in Irving that never had ducts run to it. A typical ductless mini split installation in Irving is estimated in the $3,500 – $7,500 range depending on zones and equipment. Call (855) 752-3431 for a free estimate.
Spring and fall hail and windstorms in Irving can damage outdoor condensers and rooftop units, so we plan coil protection and check for existing damage before a new install. On rooftop systems, hail guards and coil condition get assessed as part of the replacement plan. Call (855) 752-3431 to talk through your setup.
Let’s Get Your Irving AC Installed Right
Whether you’re in a south Irving ranch with a closet air handler or a Las Colinas tower with rooftop equipment, we’ll size the new system to your building, put a fixed price in writing, and set a real install date. Call (855) 752-3431 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Highpoint AC Repair.