AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox HVAC in Irving, TX
We provide independent Lennox service across Irving: AC repair, furnace repair, furnace replacement and AC installation, handled by technicians who have up to 11 years of experience on equipment just like yours. The thing that makes our Lennox work in Irving different is the diagnostic path. A 1990s builders’-grade Lennox condensing unit in a south Irving attic and a Signature Collection system on a Las Colinas rooftop follow two completely different troubleshooting routes, and we know both. We are an independent service provider, not affiliated with, authorized by, or endorsed by Lennox. Call (855) 752-3431 for a free estimate.
Why Irving Residents Choose Us for Lennox Service
Lennox equipment has its own logic: specific control boards, specific error codes, specific charge specs. A technician who doesn’t know those arrives and starts guessing. Ours don’t. We work on Lennox systems every week across Irving, from older Merit outdoor units in the southern neighborhoods to variable-speed furnaces in newer homes, so the diagnosis starts from familiarity rather than scratch.
We’re a multi-brand shop, certified to work on nine major HVAC brands, but Lennox gets the same focused attention as every one of them. Quality parts matter too. Control boards, ignitors, coils and inverter components get sourced to fit Lennox equipment correctly, and where an aftermarket capacitor or contactor meets or exceeds the manufacturer’s spec, we’ll say so and use it. You get a straight answer on what fits, what lasts, and what it costs.
Heating and cooling fall under one call, which matters in Irving. A no-cool call in July and a heat exchanger concern in January shouldn’t land with two different contractors. Installation and repair are both on our scope, so nothing gets handed off. For a closer look at our brand coverage, see our Lennox service page. Scheduling is straightforward: free estimate, written price, and a real date on the calendar.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Lennox HVAC Problems We Solve in Irving
- Failed run capacitors and contactors on Merit Series outdoor units. This is the classic mid-July no-cool call in Irving. Long 100°F stretches push a marginal capacitor past its rating, the compressor tries to start and can’t, and the house goes warm by afternoon. A bulged capacitor or pitted contactor is usually the whole story.
- Leaking evaporator coils and low refrigerant charge on older Lennox condensing units. Dirty coils and undersized ducts in 1950s-70s south Irving ranch attics make the system work harder than it was sized for, and that shows up as a coil leak or a charge that slowly walks away.
- Cracked heat exchangers and failed hot-surface ignitors on aging Lennox G-series and Elite furnaces. Pier-and-beam homes in Irving see freeze-thaw cycling through winter and long off-seasons, which is hard on ignitors. A cracked heat exchanger is a safety concern, so we check it properly rather than skip it.
- Variable-capacity inverter board and ECM blower motor faults on Signature and Elite systems. In Las Colinas tower mechanical rooms, continuous mid-summer runtime exposes control-board heat issues. These faults follow Lennox diagnostic codes, not a hunch.
- Heat pump struggles during hard freezes. Blue northers pushing through Irving can stress a heat pump’s defrost cycle and outdoor piping. We check the reversing valve, defrost board and refrigerant charge before recommending anything.
Lennox Service in Irving: What Local Conditions Mean for Your Equipment
Irving stacks two building types inside one climate band, and that shapes Lennox service here more than anything else. The 1950s-70s ranch homes around 75060 and 75061 hide attic or closet air handlers behind original ductwork. A properly sized Lennox condenser in one of those attics is fighting ducts that were never generous to begin with, so on a triple-digit afternoon the system runs longer, the coil stays wetter, and electrical parts take more heat than they should. The Las Colinas towers in 75038 and 75039 run chilled water and VAV systems on rooftops, with mechanical rooms that stay warm all summer. The same Lennox tech may diagnose a residential attic unit and a commercial rooftop DX unit ten minutes apart. That’s rare in DFW, and it’s why we keep both skill sets ready.
Lennox Models & Products We Service in Irving
We service the full range of Lennox residential and light commercial equipment you’ll find in Irving: Dave Lennox Signature Collection variable-capacity air conditioners and heat pumps, Merit Series condensing units (ML14XC1, ML15KC, ML18XC2), Elite Series air conditioners and variable-speed furnaces (XC16, XC21, EL296V, EL297V), and Lennox ductless mini-split and multi-zone outdoor units (MPC and MMD series).
Parts choice depends on the job. For control boards, ignitors, coils and inverter components, fit and warranty matter, so we source OEM Lennox parts. For capacitors, contactors and motors, a quality aftermarket part that meets or exceeds spec often costs less and lasts just as long, and we’ll tell you when that’s the right call. On 15-plus-year-old Lennox units with a failed compressor or coil, we give an honest repair-vs-replace comparison instead of selling a repair that won’t survive another summer.
One typical job: a mid-July call in an older south Irving ranch usually starts with a Merit Series outdoor unit that runs but blows warm air. A technician typically finds a bulged run capacitor or pitted contactor, verifies the compressor starts cleanly, then checks charge and coil condition because the attic air handler and original undersized ducts have been working the system harder than it was sized for. On a Signature Collection unit in a Las Colinas mechanical room, the same symptom usually traces to a control board or inverter fault, and the fix follows Lennox diagnostic codes plus rooftop condenser access.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Irving
Here are the typical estimated ranges we work from in Irving. The written estimate sets the final price, so these are a starting point, not a quote.
| Service | Typical Estimated Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3500 – $7500 |
| Tune-Up | $80 – $200 |
What drives cost: the failed part (a capacitor sits near the bottom of the AC repair range, a compressor near the top), refrigerant charge work, and access. An attic air handler in a south Irving ranch is harder to reach than an outdoor unit, and that shows up in labor. A free estimate includes the diagnosis, a written price and a clear explanation of what’s wrong. Call (855) 752-3431 to book one.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox HVAC in Irving
A marginal run capacitor or a dirty condenser coil is the most likely cause. Overnight the system catches up easily; by mid-afternoon the heat load exceeds what a weakened part or restricted coil can handle, and the house drifts warm. Attic air handlers and original ductwork in those neighborhoods make it worse. Call (855) 752-3431 for a free estimate.
Replace the capacitor. A failed run capacitor is an inexpensive electrical part, and on an otherwise sound Merit Series unit it’s a straightforward repair. Whole-unit replacement only makes sense when the compressor or coil is also failing and the equipment is well past 15 years old. Call (855) 752-3431 and we’ll give you an honest comparison.
Only if they work on commercial-grade equipment. Mechanical-room Lennox systems involve inverter boards, ECM blowers and rooftop condenser access, and a shop that only handles residential attics won’t have the diagnostic background. We service both sides of Irving, so a Las Colinas mechanical room is not out of scope. Call (855) 752-3431 to schedule.
Hard freezes stress the defrost cycle, the reversing valve and outdoor piping, and a heat pump that’s low on charge or has a failing defrost board will struggle to keep up. Sometimes the auxiliary heat is carrying the whole load and the outdoor unit isn’t doing its part. Call (855) 752-3431 for a free estimate before the next freeze.
Once a year, ideally before summer. Irving’s long triple-digit stretches and its hail-and-windstorm season are hard on condensers and rooftop units, so a tune-up that checks capacitor health, coil condition and refrigerant charge catches small problems before they become a failed compressor. A tune-up typically runs $80 – $200. Call (855) 752-3431 to book one.
Service Areas Near Irving
We also cover Lennox service in Grapevine, Carrollton, Plano, Richardson and Lewisville. If you’re just outside Irving, call and we’ll confirm coverage. Our Irving page has more on how we work locally.
Book Your Lennox Service in Irving Today
Whether it’s a no-cool call on a Merit Series condenser or a furnace repair in a pier-and-beam ranch, we’re ready. Same-day service is often available. Call (855) 752-3431 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Highpoint AC Repair.